ResMed AirFit™ F10 for Her Full Face CPAP / BiPAP Mask with Headgear
$154.00
ResMed AirFit™ F10 for Her Full Face CPAP / BiPAP Mask with Headgear.
The ResMed AirFit™ F10 for Her Full Face CPAP / BiPAP Mask with Headgear is a lightweight mask with a design and fabrication optimized for comfort. Easy to use and clean with the minimal number of parts, the mask has a reliable seal and applies minimal facial pressure.
Key Features
- Easy to use: The ResMed AirFit F10 for her full face mask has only four parts, making it easy to clean and maintain. It can be reassembled with a cushion and elbow that snap into place easily. The headgear provides reliable support. Conveniently placed hooks on the mask frame attach the lower headgear to it. The upper headgear is attached via hooks suspended from the frame that do not touch the cheeks.
- Lightweight: The mask and supporting headgear are fabricated from lightweight material and designed to touch the face only minimally. The light frame ensures a reliable seal, preventing leakage.
- No forehead support: The ResMed AirFit F10 for Her full face mask ensures a stable seal without the need for a forehead support. Touching the face only minimally with a more open design, the mask is suitable for patients who feel claustrophobic with other full face masks.
- Dual Walled Spring Air Cushion: The mask comes with a dual-walled design. The ResMed AirFit F10 for her full face mask comes with the innovative Spring Air Cushion technology that provides a strong seal with minimal facial pressure. The mask doesn’t leave any indentations despite effectively preventing leakage. The cushion is replaceable, and hence, the mask can be used over an extended period of time.
- SoftEdge Headgear: The seamless SoftEdge headgear is fabricated to minimize the possibility of skin irritations. The edges are designed to seal reliably even when worn loosely. The straps can be adjusted to achieve the best fit at the upper and lower attachment points to the mask frame. The AirFit F10 for her full face mask comes with pink accents.
- Quiet Circular Venting: The ResMed AirFit F10 for her full face mask has a circular vent at the elbow to efficiently direct the air away from the user. The elbow can be easily detached from the frame by pressing the side buttons on the elbow. The venting is placed to direct the air away from the bed partner as well, with minimum noise.
In the box:
- (1) Frame
- (1) Headgear
- (1) Cushion
- (1) Swivel and Elbow
- (1) Short Tube
| Size or Type | Extra Small, Medium, Small |
|---|---|
| Cushion Type | Silicone |
| Sizing Needs | Small Face |
| Full Face Type |
Specifications
Frame Hard Components: Polyamide
Frame Soft Components: Silicone Elastomer
Cushion Hard Components: Polyamide
Cushion Soft Components: Silicone Elastomer
Elbow: Polyamide; Polypropylene; Thermoplastic Elsatomer; Silicone Elastomer
Headgear: Nylon / Lycra; Polyurethane Foam
Soft Sleeves: Nylon / Lycra
Therapy Pressure Range: 3 to 40 cmwp
Machine Mask Setting: “Full Face” or “Mir Full”
Size Standard Pink/ Small Blue:
- 5 3/4 in Top of crown strap to top of bottom strap (Opening only)
- 5 1/2 in Opening only side to side at widest point (Does not include strap width)
- 5 1/4 in Upper strap length at longest point from opening to end (Not including Velcro closure tab)
- 8 3/4 in Lower strap length from connection to lower bottom strap to end (Not including Velcro closure tab)
Fitting Guide
AirFit F10 For Her CPAP Mask Template
Fitting and Adjusting your AirFit F10 for Her CPAP Mask
- Remove the elbow from the mask by pressing the side buttons and pulling it out.
- Take off the lower headgear straps and hold the cushion to the face.
- Align the bottom with the crease of the chin and the top with the corner of the eye.
- Then pull the headgear over the head.
- Undo the fastening tabs on the upper headgear straps.
- Adjust both straps evenly until the mask feels stable, then reattach the tabs.
- Bring the lower straps below the ears and loop the headgear into the lower hooks on each side of the frame.
- Adjust the lower headgear straps evenly until the mask feels stable.
- The fitting should be firm yet comfortable. Do not over-tighten.
- Connect device air tubing to the elbow, then attach the elbow to the mask by pressing in the side buttons, then push it into the mask.
- Turn on the device so it blows air.
- The patient now lies down to make any final adjustments if required.
- Undo the tabs on the upper headgear straps.
- Reposition both straps evenly, only enough so a seal is achieved, then reattach the tabs.
- The mask is now ready to use.
FAQ
- Do I need a prescription to buy this mask?
Yes, the FDI mandates that the purchase of any CPAP/BiPAP mask be processed only after a prescription is produced. This also lets you use your health insurance to pay for the purchase. - How often should the mask be replaced?
The cushion of the AirFit F10 for her full-face mask is replaceable and should be replaced approximately once in 3 months. It is recommended that the complete mask system be replaced every six months. Softening of the cushion and pillows can lead to leakage and drop in efficiency of your sleep therapy. These parts should be replaced as soon as any such softening is detected. - How do I clean this product?
The AirFit F10 for her full face mask has only four parts, and the joints are designed to facilitate easy dismantling and reassembly. The mask should be washed daily with warm water and mild soap or baby shampoo. Any harsh disinfectants can damage the fabrication of the product and hence should not be used. Specialized cleaning products for CPAP/BiPAP masks are available, and these can be used for the best quality maintenance. - Can I breathe through my mouth while using this mask?
Yes. The ResMed AirFit F10 for her full-face mask is designed to efficiently supply air to both your nose and mouth. - How many different sizes are available?
The ResMed AirFit F10 for her full face mask comes in a single size labeled as ‘standard.’ The best fit for each individual can be achieved by adjusting the attachment points of the headgear to the mask frame. - Is the AirFit F10 for her full face mask compatible with all CPAP/BiPAP machines?
Most CPAP/BiPAP machines are compatible with all masks, with an important exception of the ResMed AirMini, which is compatible with only certain specific face masks.
Be the first to review “ResMed AirFit™ F10 for Her Full Face CPAP / BiPAP Mask with Headgear”
You may also like…
-16%
CPAP & BiPAP Masks-Sale
ResMed Quattro™ Air for Her Full Face CPAP / BiPAP Mask with Headgear
$124.99
-18%
CPAP & BiPAP Masks-Sale
$139.99
-36%
Out of stock
$74.99
-19%
BPA - Free Masks
Fisher and Paykel BPA-Free Vitera Full Face CPAP / BiPAP Mask with Headgear FitPack (S, M, L)
$149.00
Out of stock
$159.00
$159.00
Reviews
There are no reviews yet.